CSM20-76 Series Cold Cutting Flyingsaw machine,
which is applicable cutting the material in carbon steel, stainless steel, aluminum and copper.
CSM20-76 Series Introduction:
CSM20-76 series of cold cutting flying saw machine, is different from the traditional types which uses gear or rack, we apply motor which drive the saw trolley and realize the synchronized cutting. The flying saw machine applies Panasonnic servo system，Siemens motor, high precision reducer, synchronic belt & linear guide rail for motion transfer. Contrast against the traditional flysaw machine, the new product has such advantages such as high speed, high stability, free of burrs, lower noise, and high efficiency, etc.
CSM20-76 Series’ Technical Parameters:
|
Model |
CSM20 |
CSM32 |
CSM50 |
CSM60 |
CSM76 |
|
Material |
C.S.S.S, AL, Cu. |
C.S., S.S, AL, Cu. |
C.S., S.S, AL, Cu. |
C.S., S.S, AL, Cu. |
C.S., S.S, AL,Cu. |
|
Tube scope |
Tube φ7.6-25mm |
Tube φ13-38mm |
Tubeφ20-63.5mm |
Tube φ25-76mm |
Tubeφ32-89mm |
|
Square 6-20mm |
Square 10-30mm |
Square 15-50mm |
Square 20-60mm |
Square 25-70mm |
|
|
Rectangular: Max 15*25mm |
Rectangular Max 20*40mm |
Rectangular Max 35*65mm |
Rectangular Max 40*80mm |
Rectangular Max 45*90mm |
|
|
Thickness scope |
0.5-1.5mm |
0.6-2.3mm |
0.8-3.0mm |
1.0-3.2mm |
1.2-4.0mm |
|
Stress |
<400N/mm2 |
<400N/mm2 |
<400N/mm2 |
<400N/mm2 |
<400N/mm2 |
|
Length |
2-32m |
2-32m |
2-32m |
2-32m |
2-32m |
|
Speed |
Max 150m/min |
Max 140m/min |
Max 140m/min |
Max 120m/min |
Max 100m/min |
|
Motor |
Drive motor: Panasonnic |
Drive motor: Panasonnic |
Drive motor: Panasonnic |
Drive motor: Panasonnic |
Drive motor: Panasonnic |
|
Cutting motor: Siemens |
Cutting motor: Siemens |
Cutting motor: Siemens |
Cutting motor: Siemens |
Cutting motor: Siemens |
|
|
Feed motor: Panasonnic |
Feed motor: Panasonnic |
Feed motor: Panasonnic |
Feed motor: Panasonnic |
Feed motor: Panasonnic |
